Digi-Frame Photo Scanner Betriebsanweisung

5’’ PHOTO SCANNER USER’S GUIDE

- 6 -prevent the sheath from sticking to the photos over time. z If the plastic sheaths are not in use, store them in a safe place and keep them p

- 7 -4. Connecting to a Computer (card reader mode) By connecting the scanner to a computer, you can use the scanner as a memory card reader, so tha

- 8 - After your scan, a folder with its subfolder titled DCIM\100Photo is added to the memory card and the scanned image will be saved in JPEG fil

- 9 -5. Scanning Photos to Your Computer With the Scan To PC Manager, you can easily scan photos and save the scanned images directly to a connected

- 10 -Important: Once you have installed the Scan To PC Manager and you wish to save your scanned images to a memory card or USB flash drive, you s

- 11 -6. Scanning photos to iPad or a Macintosh computer 6.1 Scanning photos to iPad With this scanner, you can scan your photos and import the sca

- 12 - Choose “Import” to import and organize the scanned images into the albums of your iPad. Tipsz If the scanned images do not display in your

- 13 - Insert your photos to the feeding slot of the scanner. The scanner begins scanning. The scanned images are stored in the folder of “DCIM\100

- 14 -8.2 Calibrating the scanner If the scanned image looks fuzzy or there are strange stripes on it, the scanner may need calibrating in order f

- 15 - With one hand holding the product, insert the sensor cleaning swab into the feeding slot and align it to the sensor cleaning swab icon with

- 16 -Question: The System LED blinks rapidly and no scan is possible.Answer: Check the following: Is the memory card inserted properly into the

- 17 -9.2 The System LED light pattern Light Description Steadily on The scanner is ready for use. Blinkscontinuously Initializing system and memo

- 18 -10. Specifications All specifications are subject to change without notice.SpecificationScanning Technology CIS (Contact Image Sensor) Accept

System Requirements ¾ IBM compatible PC 586, Pentium or higher ¾ Windows XP, Vista or Windows 7 ¾ At least 100 MB of free hard disk space (500 MB is

Contents1. Introduction…………………………………………………………….1 2. Overview………………………………………………………………….12.1 Front view…………………………………………………………………………………1 2.2 Rear view……

- 1 -1. Introduction Congratulations on your purchase of a DigiFrame EzyScan. With this scanner, you can scan and store your photos & documents

- 2 -Name Function/ Description 1Indicator light Indicates the operating status and scanning resolution of the scanner. 2Feeding Slot Insert a

- 3 -3. Installation & Operation Precautions Keep the product out of direct sunlight. Direct exposure to the sun or excessive heat may cause da

- 4 -Press POWER button for 0.5 second to switch scanning resolution between 300dpi and 600dpi. GREEN LED = 300dpi ORANGE LED = 600dpi3.2

- 5 -z This scanner only supports output images in JPEG (.jpg) format.z If the memory card is near full (lower than 1MB), the indicator light blinks